eoip tunnel on 2 router

RouterOS Forwarding Protocols
1

hi guys,

i want to achieve a redundant tunnel configuration from a router to 2 different mikrotik ccr-1036 in my datacenter.

in other words i have 1 2011 that aggregate some wireless link, this router estabilish an eoip tunnel with my datacenter trough the wireless network, and finally goes to the internet.
now i have introduced a redundant router on datacenter and i want the 2011 to estabilish 2 tunnel on each router on the datacenter and manage redundancy of tunnels automatically.

is that possible??

Thanks a lot

2

You have to setup rstp protocol on bridge where is eoip and modify priority and path cost, putting the main tunnel with high priority.
Maybe I think!

3

hi,
thanks for reply!!

indeed you solution will cover layer2 redundancy but if i have an ip address on the bridge and 1 of the ccr goes down?(the 1 with the ip in the bridge interface) how i can accomplish the l3 redundancy? with vrrp?

thanks again

4

Yes VRRP is the solution!!
Take a look
http://wiki.mikrotik.com/wiki/Manual:VRRP-examples

5

thanks a lot for your advice i will try the solution and i let you know the results :slight_smile:

BR

6

Oh good!!
So can you Let me karma :smiley: