# esim in 7.18rc

**URL:** <https://forum.mikrotik.com/t/esim-in-7-18rc/182138>\
**Category:** General\
**Created:** [February 21, 2025, 9:03am UTC](https://forum.mikrotik.com/t/esim-in-7-18rc/182138 "2025-02-21T09:03:19Z")\
**Posts on this page:** 1\
**Showing post:** 1

<div class="post-metadata">

**Author:** ![stream28](https://forum.mikrotik.com/letter_avatar/stream28/32/6_449c533f586939b6e5f246632a46421f.png) [@stream28](https://forum.mikrotik.com/u/stream28)\
**Post date:** [February 21, 2025, 9:03am UTC](https://forum.mikrotik.com/t/esim-in-7-18rc/182138/1 "2025-02-21T09:03:19Z")

</div>

Hey,

I badly need to enable esim on my lte mikrotik as it’s constantly gives me “sim not present” even couple times a day now 😐

So i updated to 7.18rc and trying to enable esim but fails with this:

status: couldn’t communicate with eSIM

I try using GUI, but also command line… i tried follow this docs: [https://help.mikrotik.com/docs/spaces/ROS/pages/30146563/LTE#LTE-LTEesim](https://help.mikrotik.com/docs/spaces/ROS/pages/30146563/LTE#LTE-LTEesim) but i have the same error as in UI.

My command is:  
/interface/lte/esim/provision interface=lte1 [sm-dp-plus=sm-v4-009-pla-gtm.pr.go-esim.com](http://sm-dp-plus=sm-v4-009-pla-gtm.pr.go-esim.com) matching-id=MY\_MATCHING\_ID\_HERE

While my esim LPA looks like this (i only have qr code): LPA:1$sm-v4-009-pla-gtm.pr.go-esim.com$O001-someNumbersAndLetters$$1

So if u understand correctly, the matching id should be O001-someNumbersAndLetters in that case right? Because the command line says $ is a finish line… even if i use “O001-someNumbersAndLetters$$1” i get the same error.

Can someone please help with this? Is this even esim feature even working now ?

---

_[View the full topic](https://forum.mikrotik.com/t/esim-in-7-18rc/182138)._
