Eth5 to route all traffic out via Eth1 VLAN?

RouterOS General
1

Hi,

I have an RB750G set up with the following config.


Eth1 - Incoming ISP connection with a One VLAN
Eth2 - Local Range IP natting
Eth3 - Bridge to Eth1
Eth4 - Bridge to Eth1
Eth5 - Bridge to Eth1

All traffic from Eth2 is routed to go out via the VLAN on eth1 which works fine.

How do I force what ever device is plugged into eth3-5 to always go out via the VLAN on eth1?

Thanks

2

bridge eth3,eth4,eth5 with vlan interface.

3

Stupid question,

How do I do this?

4 
/interface bridge add
/interface bridge port
add bridge=bridge1 interface=ether3
add bridge=bridge1 interface=ether4
add bridge=bridge1 interface=ether5
add bridge=bridge1 interface=vlan