On my 493 board, I set ether1 to Public, and ether2 to Lan. I have an ethernet switch on ether2 serving six local computers with the 192.168.15.0 /24 network. Everything works fine.
I then set up the remaining ether3 to ether9 as slaves to master port of Local. I plugged a laptop with wire into ether7. The laptop has a static ip address of 192.168.15.134 and a static dns of 4.2.2.1 I can pint 192.168.15.1 but cannot get out to the internet.
All the other computers on my network have the same static dns of 4.2.2.1 and can browse on internet.
When I print my interface ethernet, switch is set to 0 for all interfaces. What does the switch refer to? It doesn't show up below because when I pasted, it got cut off.
Any ideas why I cannot browse the internet?
Thanks,
Flags: X - disabled, R - running, S - slave
NAME MTU MAC-ADDRESS ARP MASTER-PORT SWITCH
0 R ;;; Internet WAN
Public 1500 00:0C:42:33:0C:A8 enabled
1 R ;;; LAN
Local 1500 00:0C:42:33:0C:A9 enabled none 0
2 S ether3 MP Local 1500 00:0C:42:33:0C:AA enabled Local 0
3 S ether4 MP Local 1500 00:0C:42:33:0C:AB enabled Local 0
4 S ether5 MO Local 1500 00:0C:42:33:0C:AC enabled Local 0
5 S ether6 MP Local 1500 00:0C:42:33:0C:AD enabled Local 0
6 RS ether7 1500 00:0C:42:33:0C:AE enabled Local 0
7 S ether8 MP Local 1500 00:0C:42:33:0C:AF enabled Local 0
8 S ether9 MP Local 1500 00:0C:42:33:0C:B0 enabled Local 0