Explain why Netpower 16P SFP+ shows all-0 Rx stats

RouterOS General
1

Hello,

On a remote location I’m reading stats provided by a 6.48.4-powered NetPower 16P.
This box has 2 SFP+ slots.
One is populated with a Mikrotik RJ+10 module.

Looking at this populated slot, I see:

  • that all values within Rx Stats (Rx Unicast, Rx Broadcast, Rx Pause, …) show 0 while Tx Stats values are non-zero
    This SFP+ slot is the one through which I can access the box (other ports are powering APs) so I guess anything I can see or type, pass through this SFP+ port.
    Can you explain ?

On the same location, I’ve got another Netpower 16P. This one has non-zer values in both Rx and Tx Stats.

Best regards

2

May I add that looking at the CCR2004 port to which this Netpower 16P is connected to, I see normal stats with non-zero values in both Rx and Tx Stats.

3

If this cosmetics bug bothers you enough, create supout.rif file and open support ticket with Mikrotik support.