yesterday began to jump in the log this message about the unavailability of the pool. “Failed to give out IP address: unknown pool”
did not allocate IP addresses as if he had not seen the pool. after restart everything ok and allocates normally … don’t know where can be the error or why did it ever happen ?.
on the microtik forum I found no answer with just another error (pool is empty) …
The range is big enough so the addresses could not be out on the weekend nobody is working ie the pool was almost empty except for a few things (apčka, cameras etc ..)
lease time is set to 1d + RoS version is long term 6.43.13 and FW too 6.43.13
I have an excellent idea,
post your config!! Typically the router didnt fail, the person setting up the config failed (I know this from personal experience).
/export hide-sensitive file=yourconfig
I’m afraid in this case it is not an error between the keyboard and the chair, because I’ve also seen errors “resolved” by just a reboot without changing a single bit in the configuration. So I’m afraid you’ll have to wait until that happens again, and then generate supout.rif and download it before rebooting. Don’t worry, support@mikrotik.com accepts e-mails with supout.rif describing real issues even if they don’t arrive within two weeks after purchase.
Off topic - google translate has become much better recently, yet it still cannot translate all the slang words So we know what is your native language
So we know what is your native language 