Helllo,
I just upgraded my RB450G from v5.26 to v6.7.
Everything is all right, but firewall rules, in which is use time shedule (drop traffic from 00:00:00 to 06:00:00)
are written by red font. I think, these rules are inactive.
Here are packeges in this RB450G.
Is there any option to change these firewall rules font from red to black?
Thank You.
Here are once again these invalid firewall filter rules.
[admin@RB450G] /ip firewall> filter print
Flags: X - disabled, I - invalid, D - dynamic
…
17 I chain=forward action=drop src-address=192.168.0.35-192.168.1.254 time=0s-1d,sun,sat
18 I chain=forward action=drop src-address=192.168.0.35-192.168.1.254 time=0s-6h30m,mon,tue,wed,thu,fri
19 I chain=forward action=drop src-address=192.168.0.35-192.168.1.254 time=18h30m-1d,mon,tue,wed,thu,fri
…
When I delete time parameters from these rules, then they are correct (in black letters in Winbox, not red ones).
Yes, these rules are inactive when red because they are outside the time range. They will turn black automatically when inside the time range. I do not think there is a way to change this.
Yes, these rules are inactive when red because they are outside the time range. They will turn black automatically when inside the time range. I do not think there is a way to change this.
Yes, it is true. I have just found this out and I wanted to delete my question.
Upgrade from v5.26 to v6.7 confused me and I thought this was the reason of it.
Thank you.