Flow control issue on RB5009 and CRS305 - NEED MIKROTIK SUPPORT

[gmas]

RouterOS implements flow control with off as default; read: https://help.mikrotik.com/docs/display/ROS/Ethernet
Enable rx-flow-control & tx-flow-control on MikroTik ports to forward ONT pause frames is worth consideration.

I know, TX/RX FC enabled an all ports involved doesn’t make any impact. As I’ve also sai the counter of Tx/RX pause frame is still at zero.. so I don’t think it’s working as it should..

I’m seeing the same issue on CRS310 http://forum.mikrotik.com/t/flow-control-between-css610-and-crs310/171161/5 RouterOS is showing 0 RX Pause frames on the SFP interface even though the other end is generating 1000s of TX pause frames.