FTP not work

[roland]

got the routerboard532 with OS 2.9 (unfortunatelly).
Lot of problems because change from 2.8 to 2.9 are huge.

Took me 30min to get a simple masquerade to work again and still FTP-sites have problems. (cannot connect and then times out).

Q: Where is the trick to get simple FTP to remote sites back (looks like a double NAT below)?
200 PORT command successful.
Opening data connection IP: 192.168.2.111 PORT: 1657.
MLSD
550 Cannot connect to 192.168.2.111:5003 - No route to host.
An established connection was aborted by the software in your host machine.
Connection closed.

PS: Why does MT ship the routerboard with a BETA-OS (useless for production)?

[cmit]

@roland

Took me 30min to get a simple masquerade to work again

PS: Why does MT ship the routerboard with a BETA-OS (useless for production)?

If you read the manual, configuring masquerading should take no more than two minutes.
The reason why the new RouterBoard ships with the 2.9 (beta) is simple: It’s a new hardware platform (other processor), which is not supported by current releases (2.8.x). This is clearly stated all over the RouterBoard website etc.