We have a problem with RB 532 and two atheros cards. There are three clients connected to one sector antenna. The signals are good (60 - 75), but there are some complaints that no data goes through. One ping out of 100.
What could be the problem.
- Intereference
- Bad antenna
- bad Cable
- humid in connector
Perhaps faulty cards. bad Ack Setting and etc.
hope it helps.
Is there a recommended ACK setting beside the default
I had this issue happen to me one time, and I thought it was a bad RB or cards… I switched out the cards and the problem was still there… On a suggestion from somone else on the boards, I /system reset the configuration and reprogramed it. Came right up and never had to do it again.
ack should be set to dynamic if it is longer than 2000 meter.