Got my Omnitik in today

RouterOS Wireless Networking
1

First boot there was no WLAN, reboot and it showed up, works fine so far.

A scan from my office shows my 5GHz AP indoors, my 5GHz bridge 100ft up and 100ft north turned 90* away, my 5GHz main feed, again 100ft up, 100ft away and facing the opposite direction.

An R5H turned down to 15dBm TX and a 26dBi Pac Wireless grid, I’m reading a -88 on the ground, inside my office. Normally I can’t see my 5GHz outdoor AP and this one can see the back of my grid.

I’m impressed. I just hope that doesn’t mean it will pick up 5GHz noise from 20 miles away.

2

Are the POE lights backwards from the Ethernet lights?

I plug into port 5, port 2 turns orange. I plug into port 2, port 5 turns orange, same with 3 and 4.