# GPOE-USB raspberry 4B 5V noise issue

**URL:** <https://forum.mikrotik.com/t/gpoe-usb-raspberry-4b-5v-noise-issue/274483>\
**Category:** MikroTik hardware general\
**Created:** [November 13, 2026, 9:00am UTC](https://forum.mikrotik.com/t/gpoe-usb-raspberry-4b-5v-noise-issue/274483 "2026-11-13T09:00:32Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Chateau](https://forum.mikrotik.com/letter_avatar/chateau/32/6_449c533f586939b6e5f246632a46421f.png) [@Chateau](https://forum.mikrotik.com/u/Chateau)\
**Post date:** [November 13, 2026, 9:00am UTC](https://forum.mikrotik.com/t/gpoe-usb-raspberry-4b-5v-noise-issue/274483/1 "2026-11-13T09:00:32Z")

</div>

I am using GPOE-USB with rpi 4B and hifi-berry hat. Hat looses sync all the time. When i power rpi from phone adapter there arent any issues.  
Is my GPOE faulty or Is this a characteristic of it?

---

<div class="post-metadata">

**Author:** ![gigabyte091](https://forum.mikrotik.com/letter_avatar/gigabyte091/32/6_449c533f586939b6e5f246632a46421f.png) [@gigabyte091](https://forum.mikrotik.com/u/gigabyte091)\
**Post date:** [November 13, 2026, 9:50am UTC](https://forum.mikrotik.com/t/gpoe-usb-raspberry-4b-5v-noise-issue/274483/2 "2026-11-13T09:50:12Z")

</div>

Did you check the power draw or voltages when fault appears ? Maybe GPOE is overloaded. Are you using same cable when powering RPI from the charger and GPOE ?

---

<div class="post-metadata">

**Author:** ![jaclaz](https://forum.mikrotik.com/user_avatar/forum.mikrotik.com/jaclaz/32/55652_2.png) [@jaclaz](https://forum.mikrotik.com/u/jaclaz)\
**Post date:** [November 13, 2026, 12:30pm UTC](https://forum.mikrotik.com/t/gpoe-usb-raspberry-4b-5v-noise-issue/274483/3 "2026-11-13T12:30:09Z")

</div>

BUT how are you powering the GPOE-USB?

And how many A does the rpi need?  
In theory it wants 3.0A@5.1V (15.3W total), but I have seen many people recommend a 4A@5V power supply.

Strictly speaking a 802.3af power source is not enough to provide the "target" 15W (3A@5V) the GPOE-USB promises.

Even if it is 90% efficient, it needs 15/0.9=are 16.67W which at 48V (say) are 0.35A, without considering any loss in cable.

A strict 802.3af power supply may fall shorter than that, as the standard mandates 15.40W at the PSE in order to power a load of max 12.95W .

A 802.3at is needed - still in theory - to exceed 12.95W at the PD.
