Graphing 100% cpu usage

RouterOS General
1

Good day,

I have a interesting issue with a CRS326-24S+2Q+ that is sitting pegged at 100% usage.

Running the profiler shows that its graphing taking up all the CPU.

Thing is, there is no graphing setup on this device.

Rebooting it solves the issue, but after a few weeks the problem returns.

Also disabling snmp does not solve the problem.

All ports is in the same bridge and is being HW offloaded.

Any suggestions ?

2

Where I can buy one Palantír to see your config?

3

Hi There,

i have the same Problem.
What can fix this? Disable Graphing?
Is there a way to get out of 95% CPU Usage for graphing without reboot the CRS?
All Ports are Hardware-Offloaded. only 3 Ports are connected. /tool profile shows 96% CPU for graphing…but the Switch works. Only the graphings are not show.

[admin@ext-switch] > tool graphing resource
[admin@ext-switch] /tool graphing resource> disable
numbers: 0
Script Error: action cancelled
action timed out - try again, if error continues con
tact MikroTik support and send a supout file (13)
[admin@ext-switch] /tool graphing resource>





Christian

4

Hi,

no other way to stop graphing in working CRS?
Is there a way to close the process of graphing without booting the CRS?

Christian

5

Hi there,
we had same problem on CCR1036. we do everyday reboot at 04:00 AM.
After exchange for CCR2116 problem has gone.
Now we had same problem again on other CCR2116.
Anybody find solution without reboot?

6

Well the answer for me was to just disable graphing on the device. Problem solved.

7

newer Routerboards have limited storage space, so if you have enabled Graphing for a great ammount of objects you will end up with problems

We must abandon the habit of enabling graphing for all interfaces if we have many interfaces for example in a pppoe bras router with many users

Same situation with graphing queues

8

Hi,

on my CRS there is no space-Limit.
What can be the source of the Problem?
I need graphing…but no 100% CPU Usage of this after a time…
and rebott every night is no option.

Christian

9

The built in mikrotik graphing is terrible.

If you 100% need it it would be best to setup a server with something like librenms and pull the stats using snmp

10

I face the same issue,
my switch used 100% CPU, see the profile said almost 80% used by graphing, but no graph configured on the switch.

I wonder if any of mikrotik CRS users solve this problem ?