Graphs don't store in RBs

Hardware MikroTik hardware general
1

Hi all,
I’m having trouble getting graphs stored on disk even though “store on disk” has been enabled. Everything went blank after power off (NOT REBOOT).

Thanks

Flags: X - disabled 
 #   INTERFACE             ALLOW-ADDRESS      STORE-ON-DISK
 0   all                   0.0.0.0/0          yes
2

I have the exact same problem on all version of routeros. I gave up and decided to do the graphing from cacti externally.

3

Are you using NTP client to set time on the router?

After reboot, graphing is checking the system clock. If correct time is not set during first 5 minutes after reboot, graphing accepts the new time as correct, even if it is 1970/Jan/01. All the previously collected data, which is invalid in respect to the new time, is dropped.

In other words - if your router does not get correct system time in 5 minutes after reboot, it is likely that you will lose previously collected data. Does not matter how the time is set (manually or via NTP).

4

Yes, I have NTP running on all routerboards.