Groove 5Hn Simple PTP Bridge

RouterOS General
1

Hello,
I am confused on the steps to configure a simple bridge. Is the correct way to configure one unit in Bridge mode, and the other to station wds?
Is there anything else to configure?
We are only connecting 2 buildings together and have no need for routing. I am new to the routeros, any help is appreciated.

Wireless network bridge with Groove A-52HPn
Wireless network bridge with Groove A-52HPn
2

Hello,

Nothing difficult to do,

  1. set one end radio Ap or Bridge mode (under wireless),
  2. The second one set radio Station-Wds mode (under wireless)
  3. Enable static-wds on both ends (under wireless)
  4. Create Wds interface and put the mac-address of the Station-Wds radio to Ap or Bridge unit
  5. In Ap or device create bridge and add the wds and ethernet to bridge ports
  6. In Station-Wds create bridge and add the wireless interface and ethernet device to bridge ports
  7. Under firewall diable conn-track

Kind Regards

Aleksander

NB! Mikrotik is much more than SOHO box

3

Thank you, works great!

4

point 7 what do you main with conn-track? in firewall.
I know that this is a old topic butt i need more explane

5

another method is even more simple:

  1. open quickset on one groove, and set p2p bridge mode in Client mode
  2. open quickset on other groove, and set p2p bridge mode in Server mode
6

Thank you Normis, this is idd the easy way to do that.
Great