I have some problems with Groove A-52HPn:
- I recieve extensive data loss error
- Signal is dropping after some time
- Dynamic range incorrect
When i switch to B/G/N mode, the dynamic range is not correct(its 3x the correct range) but when on B/G then is the range correct(all of my current clients are on B/G). Tx-power is set to 23dBm (200mW).
When i recieve the extensive data loss error, interface just disconnects all my clients and nobody can connect anymore(i need to disable and reenable the interface so that clients can connect again). So i made a netwatch for one address of my client with this script: interface wireless enable 0.
When would there be a fix for this? These are for sure not heating problem, i have lowered the TX Power to 23dBm and the CPU frequency to 500MHz and the current weather temperatures varies from 2 to 20 degress..
My firmware version is 3.10, RouterOS is 6.5..