Hi, I’m using MT hAP ac 6.41.2 with latest firmware, only as Access Point in our household with few laptops and smartphones.
Here is my WiFi configuration:
/interface wireless
set [ find default-name=wlan1 ] country="czech republic" disabled=no \
distance=indoors frequency=auto frequency-mode=regulatory-domain mode=\
ap-bridge ssid="JaR WiFi" wireless-protocol=802.11
set [ find default-name=wlan2 ] mode=ap-bridge ssid="JaR WiFi" \
wireless-protocol=802.11
/interface wireless security-profiles
set [ find default=yes ] authentication-types=wpa-psk,wpa2-psk eap-methods="" \
group-ciphers=tkip,aes-ccm mode=dynamic-keys supplicant-identity=MikroTik \
unicast-ciphers=tkip,aes-ccm wpa-pre-shared-key=*tennumbers* \
wpa2-pre-shared-key=*tennumbers*
Most important: “band=2ghz-b/g” is missing for some reason in rsc file.
After running (Start and Stop) a “Scanner”, wifi module won’t turn back to “R - running” state = clients cannot connect (see attachment), until interface or MT restart.
Cpu usage is normal.
Have supout file generated during problem.
Pavel J.
