Can the Ethernet leds on the back be turned off?

Yay. With 7.24rc1 ALL the LEDs can now be turned off. Thank you Mikrotik.

Hi, asked the same issue for my switch, also mounted at the wall to condert fiber into wire. The only idea was to use a black pen or a piece of tape to cover it. To unsolder it is no good idea and SwOS do not provide anything to dimm it.

AX3 doesn’t run SWOS. Other then that, those ethernet ports have the LEDs embedded, no way to switch them off except with some masking like paper, tape or stickers (they do exist for that purpose).

[image] holvoetn: AX3 doesn’t run SWOS. Sure, it runs the much more advanced RouterOS, that anyway offers no way to dim those leds.

In this post are you referring to the hap ax3? [image] v7.14beta [testing] is released! Announcements Before and after. The dim blue light shows on the photo (slow shutter because of light conditions) but is not visible at all with naked eye. Ports on the back are compl…

MikroTik community forum

Hap AX3 Ethernet leds

RouterOS

jaclaz June 22, 2025, 12:43pm 2

No.

blue led of CSS610-8G General

Hi, the blue LED of that switch is partly annoying since this switch is not installed in a rack but on the wall to adapt a fiber to RJ45. Since it uses SwOS lite there no setting to switch off any LED or dimm it. Does anyone have an idea how to dimm or switch them off? Thanks

show post in topic

Home
Categories
Guidelines

Powered by Discourse, best viewed with JavaScript enabled