hAP Lite does't connect two devices on wifi

[Shokai]

Hello,

I have a MikroTik hAP Lite (RB941-2nd-TC) with the following settings:
-Bridge (eth2, eth3, eth4 and wlan)
-IP configured
-DHCP Server configured
-PPPoE configured
-NAT configured
-DNS configured
-Wifi configured

The problem is:
eth2-4 and wlan working fine at same time. I can use 3 devices in the eth interfaces, but in wlan i just can connect 1 device, if I try connect a second device I have the message “Can’t connect”

Someone can help me?

[normis]

Did you do configuration by hand, or used Quickset? Try to do a configuration reset and see if it helps. By default, if you use “Home AP” mode in Quickset, there is no limit to how many devices can connect.

[Shokai]

@normis

Did you do configuration by hand, or used Quickset? Try to do a configuration reset and see if it helps. By default, if you use “Home AP” mode in Quickset, there is no limit to how many devices can connect.

I did it manually.

@normis

Try to do a configuration reset and see if it helps. By default, if you use “Home AP” mode in Quickset, there is no limit to how many devices can connect.

Thanks, this worked. Now I can connect more devices.