HAP POE lite Power issues

Hardware MikroTik hardware general
1

Hi All,
I have hAP POE lite, current Firmware, that is powering 1 UAP AC lite and 1 NanoBeam AC 16. They will not auto-power on I have to force POE on. Any reason why this would happen.
UAP lite cable 10 - 20 meter
Nano beam 10 - 20 meters.

I can plug in a Pico with a standard patch cable and no problem.

Bill

2

Guess you mean Hex POE Lite.

Update ROS to 6.36.2, once upgraded check System > Routerboard, “Current” vs “Upgrade” firmware, and upgrade it if needed, Rebooting afterwards.

Then try setting different POE priority values (10 for the UAC, 20 for the NBE) on their Interface > Ethernet interface POE tab.