hellp me-about vlan & virtual ap

RouterOS Wireless Networking
1

this my configuration

IP ON MAIN ROUTER
ether2=192..168.0.254
vlan1=192.168.2.2
vlan2=192.168.3.2


IP ON RB
ether1=192.168.0.252
vlan1=192.168.2.1
vlan2=192.168.3.1
wlan1 10.0.1.1/24

wlan2 10.0.2.2/24
wlan3 10.0.3.3/24

note:
vlan1 for sharing PUBLIC IP to client
vlan2 for client with privat IP/local IP
routing mode in RB

how to make a configuration for my client

2

Have you tried just bridging together the vlan’s and the VAP’s (one bridge for each pair)?

3

yes i’m bridging vlan and vap to one birge but not in my client. do I also must make vlan,wlan and ether1 into one bridge at my client routerboard. I have tried use AP generic at client like senao with mode bridge and succeed. but when I replace it with RB client will never connected