HELP!!! 2 IP and one GATEWAY

RouterOS General
1

Will it work?

/ ip address
add address=1.1.1.50/24 network=1.1.1.0 broadcast=1.1.1.255 interface=Local comment=“”
disabled=no
add address=10.111.0.2/24 network=10.111.0.0 broadcast=10.111.0.255 interface=Public2
comment=“” disabled=no
add address=10.111.0.3/24 network=10.111.0.0 broadcast=10.111.0.255 interface=Public1
comment=“” disabled=no
/ ip firewall mangle
add chain=prerouting in-interface=Local connection-state=new nth=1,1,0
action=mark-connection new-connection-mark=odd passthrough=yes comment=“”
disabled=no
add chain=prerouting in-interface=Local connection-mark=odd action=mark-routing
new-routing-mark=odd passthrough=no comment=“” disabled=no
add chain=prerouting in-interface=Local connection-state=new nth=1,1,1
action=mark-connection new-connection-mark=even passthrough=yes comment=“”
disabled=no
add chain=prerouting in-interface=Local connection-mark=even action=mark-routing
new-routing-mark=even passthrough=no comment=“” disabled=no
/ ip firewall nat
add chain=srcnat connection-mark=odd action=src-nat to-addresses=10.111.0.2
to-ports=0-65535 comment=“” disabled=no
add chain=srcnat connection-mark=even action=src-nat to-addresses=10.111.0.3
to-ports=0-65535 comment=“” disabled=no
/ ip route
add dst-address=0.0.0.0/0 gateway=10.111.0.1 scope=255 target-scope=10 routing-mark=odd
comment=“” disabled=no
add dst-address=0.0.0.0/0 gateway=10.111.0.1 scope=255 target-scope=10 routing-mark=even
comment=“” disabled=no
add dst-address=0.0.0.0/0 gateway=10.111.0.1 scope=255 target-scope=10 comment=“”
disabled=no

:unamused:

2

I think that will not work :confused:
I have the same problem, how to make load balancing on the same gatheway?!

3

first is would suggest that you DO NOT USE PUBLIC ADDRESSES

second maybe in this page you could find something useful:
http://wiki.mikrotik.com/wiki/Routing

4

I think it is not going to work because you have to public IP-s of the same class. as you writte it down in your configuration:

add address=10.111.0.2/24 network=10.111.0.0 broadcast=10.111.0.255 interface=Public2
comment=“” disabled=no
add address=10.111.0.3/24 network=10.111.0.0 broadcast=10.111.0.255 interface=Public1
comment=“” disabled=no

the two IP-s, 10.111.0.2 and 10.111.0.3 are of the same class, on the same broadcast, they got to be different, like the second should be sth. like 10.111.1.2