Dear Friends,
I have RB951ui-2HnD with Static IP 192.168.1.1 :
Eth01 = Radio (Internet).
Eth02 = 10/100 Switch 24 ports.
Eth03 = 10/100 Switch 16 ports.
Eth04 = RJ45 connected directly to my PC (192.168.1.2)
Eth05 = empty.
My PC can access to the Mikrotik and Internet as well.
i have many Wireless AP connected through those 2 Switch, all of them used the same IP class (192.168.1.x).
The problem is, i couldn’t access any of those IPs from my PC, except the Mikrotik (192.168.1.1)
if i use my Phone to connect to the Wireless APs, it’s even worst, i couldn’t access the Mikrotik. Each AP is using the same Gateway (192.168.1.1)
This is the setting of each Wireless AP:
AP #1
Device Static IP = 192.168.1.3
DHCP = 192.168.1.51 ~ 192.168.1.60
Gateway = 192.168.1.1
AP #2
Device Static IP : 192.168.1.4
DHCP = 192.168.1.61 ~ 192.168.1.70
Gateway : 192.168.1.1
and so on..until the last AP.
Anyone please help me to solve this problem.
This is my first time using Mikrotik.
i thought there must be somethingin the Bridge setting, but not sure what to do.
any advices and suggestions will be much appreciated.
Many thanks before.