Help !!! Need Config help for crs mikrotik switch

SwOS
1

Any body help me on crs mikrotik switch that how do i limit bandwidth on vlan. i will explain the picture

Like i have a trunk port ether-2 there vlan-200 vlan-300 and vlan -400 . i do not want to limit bandwidth on port.
i want to limit bandwidth on vlan like i want to limit bandwidth for vlan-200. please any body suggest me the configuration.

2

google is your friend

I am no expert but a quick google found this which I think you could try:

http://forum.mikrotik.com/t/bandwidth-limiting-accross-vlan/25767/1

See how you go using V6 as this is an older post.

3

Thanks for your reply. But its in switch not in router. mikrotik qos policy for switch.But from CRS manual
i can not understand how limit bandwidth on vlan in CRS mikrotik switch.

4

I guess I misunderstood.

Sorry but I do not have much experience with the CRS yet myself.

Good luck.

5

You should post over in the Beginner Basics or General forums. The CRS runs RouterOS, not SwOS, so you’ll get much more visibility over in those forums.

6

Rate limiting is (usually) a router’s job. The CRS line of products have pretty weak CPUs for this type of task.