Hi everyone,
I’m Giacomo and i’m using a mikrotik map2nD for a particular application (i don’t know if it is really particular).
I have a map2nD (from now called MAP1) connected to an existing WI-Fi Access Point. on the eth2 of the MAP1 i have connect another map2nd (from now called MAP2) on its eth1 port.
So the MAP2 connect to internet thanks to the MAP1 that is connect to a generical access point.
On the eth2 of the MAP2 i have connected a raspberry PI used as web server. The MAP2 also generate an HOTSPOT (ap bridge) that redirect you to an access page (stored on the raspberry).
what i would like to now is if it is possible to do the same configuratione described above with only one map2nD!
i hope i been clear
if you have other alternative on how set up this configuration I will be happy to ear it. (or other router to suggest)
Thanks