Help with cAP 2n Setup

RouterOS Wireless Networking
1

Hi,

Here’s my setup

I have a firewall, a microtik router bridged, with winsrv2k8r2 as dhcp/dns.
What i need help with is

I initially set it up and put it in the same range 172.16.1.1/24, which worked great, but needed to have all wireless clients in their own subnet.
So i tried to do that, but I broke it because I couldn’t manage the AP anywmore.
I gave it it’s own range 172.10.1.1/24, and i broke the management ip.

So i factory reset the wireless cAP 2n. but now I can’t access it to manage it.

I’m working remotely, do i have to be on site to get this handled?

My questions are.

  1. Do i have to be on site to manage, or set the NIC to the same subnet before I can see it?
  2. Can someone help me with configuring the proper settings so that I can put all wireless devices on their own subnet with their own dhcp running from the cAP?

Gateway: 172.16.1.1
DHCP: 172.16.1.10

Please don’t scold me and refer me to the WiKi, i’ve used it and to me certain things don’t look as straightforward as the wiki seams.

2

You can mac telnet from other directly (or in bridge/switch) connected mikrotik device. See the ip-neighbors.

3

Thanks, a little to late it’s already reset.

How would I go about putting clients on their own subnet if the cAP is in bridged mode?

4

Using capsman or Ap bridge mode?

5

ip bridged mode.

How do i do capsman?