Help with creating wireless access to switch with managment VLAN

RouterOS Wireless Networking
1

Need help with client/managment vlan and connecting to CRS112 switch remotely

Hello everyone! Im trying to set up on winbox managment vlan and two client vlan, and most of its done already. However, when i try to connect with IP address, it stays on “connecting” for a while until a time-out. How to solve this?

I got managment vlan as an vlan interface, bridge is vlan filtering, made tagged and untagged connections on bridge > vlan, route is 192.168.xx.0/24 (bridge gateway), ip im connecting to is the switch ip, firewall has nothing to block it and all ip > services are on.

What should I do? Maybe can help me with a step-by-step after a switch reset? Anything helps

2

The DE FACTO guide on setting up VLAN for ROS

http://forum.mikrotik.com/t/using-routeros-to-vlan-your-network/126489/1

3

Can you please share your config:

/export file=anynameyoulike

Remove serial and any other private info.

And in addition to @holvoetn:
https://help.mikrotik.com/docs/spaces/ROS/pages/103841836/CRS1xx+2xx+series+switches+examples#CRS1xx/2xxseriesswitchesexamples-Managementaccessconfiguration

4

Configuration, based on linked tutorial, will work fine … but sloooowly because CRS1xx can’t offload bridge config to switch chip. Instead one has to configure things directly on switch chip: https://help.mikrotik.com/docs/spaces/ROS/pages/103841835/CRS1xx+and+2xx+series+switches