Help with CRS326-24g-2s+rm

SwOS
1

Hi all,

I bought CRS326-24G-2S+RM switch, and today I tried to configure some fundamental things, but there was problems.
I want to use port 24 as TRUNK with 3 VLANs (10,20,30) and native VLAN 1.
Ports 1-20 is in native (untagged) default VLAN 1
Port 21 is “hybrid” with untagged VLAN 1 and tagged 10
port 22, 23 is native (untagged) VLAN 30
I figured out that is almost not possible to configure through RouterOS (as switch, not bridged), and I try to configure as WebOS but:

  • Switch is get stuck with configured IP address - I can see device, and IP address with WinBox
  • I can’t ping device
  • I can’t connect to device at all
  • I try to reset device with reset button but nothing happend
  • If I unplug power supply, press reset and turn on, switch boot in RouterOS, and I can access it.

Please, can someone help me?

Thanks a lot in advance.

2

Using Winbox and the OS set to RouterOS, it is not yet possible to use the hardware “Switch” menu and get the extra VLAN settings. I’ve never used SwitchOS, so don’t know what that looks like. With RouterOS, you can use create VLANs from the interface menus and bridge menus, but that is CPU based and not hardware.