--------------------------------------------------- ENGLISH ----------------------------------------------------------------------------
Hello, I am new to the forum. Greetings to all. I publish this post because I need help with the equipment mentioned in the title of the post.
Configure the device with fixed IP, on ethernet 1 (internet signal input - I don’t use bridge I don’t like it) and with Wlan I send internet signal to the clients. It works well is fast.
But what I can’t do is manage bandwidth over IP. Try simple queues and don’t manage.
Connect 3 Wi-Fi devices, I put an IP to each one and when I do a speed test I throw the total bandwidth and the simpe queues does not react (I do not mark packets for each ip of the devices).
in short, how can I manage bandwidth by ip or by mac in Groove? . If anyone can help me with an explanation or a video, I thank you in advance. Regards.
--------------------------------------------------- ESPAÑOL -------------------------------------------------------------------------
Hola, soy nuevo en el foro. Saludos a todos. Publico este post porque necesito ayuda con el equipamiento mencionado en le titulo del post.
Configure el equipo con Ip fija, en la ethernet 1 (entrada de señal de internet - no uso bridge no me agrada) y con Wlan envio señal de internet a los clientes. Funciona bien es rapido.
Pero lo que no logro hacer es administrar el ancho de banda por IP. Intente con simple queues y no administra.
Conecte 3 equipos wifi, les pongo una ip a cada uno y cuando hago un test de velocidad me tira el total del ancho de banda y el simpe queues no reacciona (tampoco me marca paquetes por cada ip de los dispositivos).
en resumen, ¿como puedo administrar el ancho de banda por ip o por mac en el Groove? . Si alguien me puede ayudar con una explicacion o un video les agradezco desde ya. Saludos.