Help with haP AX lite

[jang430]

Hello. I’d like to request help with my Hap AX Lite lte6, without internet after reset, and starting without config.

I’ve flashed the router several times, and have always selected starting without config to learn how to set it up step by step. Currently, I have ether1 as primary, and lte1 as backup. ether1 has distance of 1. As for lte1, I don’t recall setting it anywhere, but if I remember correctly, so as long as ether1 has distance of 1, lte1 becomes backup.

Now, I tried to unplug ether1, and only have lte1 with sim. Ether2-4 are bridged. I don’t get any internet when connected to ether2-4.

Is there anything to set for lte1? Aside from inserting the sim? I also don’t see lte1 when I try DHCP Client. I wanted for it to get IP address.

[admin@MikroTik] > ip route print Flags: D - DYNAMIC; A - ACTIVE; c - CONNECT Columns: DST-ADDRESS, GATEWAY, ROUTING-TABLE, DISTANCE DST-ADDRESS GATEWAY ROUTING-TABLE DISTANCE DAc 192.168.1.0/24 bridge main

[BartoszP]

Hi,

why you intially posted your post in the "Forum rules" topic?

Dont you think that there is DOZENS of better categories you could have stated with?

[jaclaz]

@BartoszP
the "right" topic is this one:

Reset Hap AX Lite LTE6 without config, now, no LTE

I’ve several topics here, and one of them is to use LTE1 as backup, ether1 as primary. This works fine now. I’ve reset the router to default, and started without config. Now, without anything plugged into ether1, my LTE1 doesn’t connect to internet. Has this anything to do with deleting all LTE1’s setting? I don’t want to set all things from scratch once again. Can someone point what details I should make sure it’s there so I have internet for whole house.