Hi!
New to MikroTik, but experienced in network constructs. I’ve been poking around the GUI today and not getting done what I need to. Wondering if I could ask for some assistance on basic config - gives me something to learn from!
We’re building an embedded project that will include a CRS125-24G-1S-2HnD-IN. What I need to accomplish is the following:
VLAN A has ports 1-10,21 and the switch acts as router on 172.31.5.254/23
VLAN B has ports 11-20,22 and the switch acts as router on 172.31.7.254/23
VLAN C has ports 23-24 and the WiFi and the switch acts as router on 172.27.252.4/22
VLAN D is an uplink port on port 25 (SFP). It acts as a DHCP client and runs NAT/firewall
Any vlan can route to any other VLAN or to the outside world via VLAN D
What I’m not understanding is the relations between ports, vlans, bridges, master ports, slave ports, switch1-cpu, and so forth… Some guidance to a basic config that I can learn from would be much appreciated.
Thank you!