Hi, i’ve been searching the forums regarding this setup and i cant seem to find a solution so i decided to post.
here’s my Setup :
============================================================
Mikrotik RB1100 - Cisco Switch - NanoBridge A <----> NanoBridge B - Mikrotik 750
Mikrotik RB1100 - VLAN 203, 205, 206
VLAN 203 - 192.168.11.x
VLAN 205 - 192.168.15.x
VLAN 206 - 192.168.16.x
Cisco Switch - encaps dot1q
native 203
allowed 205,206
mode trunk
NanoBridge A - 192.168.11.20
Access Point WDS
NanoBridge B - 192.168.11.21
Station WDS
Mikrotik 750 - - Ether 1 = 192.168.11.9
-
Ether 2 = Trunk (VLAN205 and VLAN206)
-
Bridge_VLAN205 = (ether2 and VLAN205)
-
Bridge_VLAN206 = (ether3 and VLAN206)
-
routed to ether1 (192.168.11.1 reachable)
============================================================
This setup works without the NanoBridges.
Can anybody help with this setup? or am i missing something?
i can get 15.x ip on ether2 and 16.x on ether3 but no internet.
Thanks