HI Buij…
To understand you have 1 Access Point with three WLANs.
You also wish to pass your vlans onto the Hex router on ether2
(1) Remove any vlan IDs from wifi (they dont belong in the master or virtual wlans)
(2) Why is your config disjointed, you have two /interface wireless locations and two /interface vlan - makes it hard to read/understand the config!!!
(3) You cannot name a WLAN as the interface for a vlan. ALL VLANS interface are the bridge!!!
(4) YOU need ONE bridge!!
Ahh okay I give up, this is a mess because you need a better starting point.
Suggest you read this document to get you going!!! Will see your next config attempt after digesting it…
http://forum.mikrotik.com/t/using-routeros-to-vlan-your-network/126489/1