Hex S set to bridge mode needs constant rebooting

[RcRaCk2k]

I found the issue and was able to solve it by disabling HW-Offload Settings. rOS is enabling HW-Offload randomly, not for known reason, and then traffic stops forwarding.

bridge stops forwarding traffic

Today i was able to fix the issue by seeing strange things to happen. That was pure luck that i was on the right device at right time to find the culprit. Short-Solution: Disable HARDWARE-OFFLOAD on the Bridge-Port I was changing something on a device (vlan from 1340 to 1341) all was configured correctly but the device was not able to communicate with the network. There was no RX-Traffic. So when doing /tools/sniffer/quick interface=ether1 direction=rx i was not able to see any traffic. But on…

Seems like a firmware bug.
Bug also exists in 7.19.3