High Latency, wireless bridge

RouterOS Wireless Networking
1

I have wireless link between routerboard600 & rb433. Sometimes latency grows up to 1000-2000ms. Sometimes a lost of packets is very large, but signal-noise is good. Why does it happen?

Config rb600:
[admin@MikroTik] > int wire pr
Flags: X - disabled, R - running
 0  R name="wlan1" mtu=1500 mac-address=00:0C:42:2B:99:B9 arp=enabled interface-type=Atheros AR5413 mode=station-wds
      ssid="123" frequency=5825 band=5ghz scan-list=default antenna-mode=ant-a wds-mode=dynamic wds-default-bridge=bridge1
      wds-ignore-ssid=yes default-authentication=yes default-forwarding=yes default-ap-tx-limit=0
      default-client-tx-limit=0 hide-ssid=no security-profile=default compression=no

[admin@MikroTik] > int br pr
Flags: X - disabled, R - running
 0  R name="bridge1" mtu=1500 arp=enabled mac-address=00:0C:42:28:DE:7B protocol-mode=none priority=0x8000 auto-mac=yes
      admin-mac=00:00:00:00:00:00 max-message-age=20s forward-delay=15s transmit-hold-count=6 ageing-time=5m

[admin@MikroTik] > int wire registration-table pr
 # INTERFACE                             RADIO-NAME       MAC-ADDRESS       AP  SIGNAL-STRENGTH TX-RATE UPTIME
 0 wlan1                                 000C422B99CB     00:0C:42:2B:99:CB yes -56dBm@6Mbps    54Mbps  1h16m38s




Config rb433:

[admin@MikroTik] > int wire pr
Flags: X - disabled, R - running
 0  R name="wlan1" mtu=1500 mac-address=00:0C:42:2B:99:CB arp=enabled interface-type=Atheros AR5413 mode=bridge ssid="123"
      frequency=5825 band=5ghz scan-list=default antenna-mode=ant-a wds-mode=dynamic wds-default-bridge=bridge1
      wds-ignore-ssid=no default-authentication=yes default-forwarding=yes default-ap-tx-limit=0 default-client-tx-limit=0
      hide-ssid=yes security-profile=default compression=no

[admin@MikroTik] > int br pr
Flags: X - disabled, R - running
 0  R name="bridge1" mtu=1500 arp=enabled mac-address=00:0C:42:36:A3:28 protocol-mode=none priority=0x8000 auto-mac=yes
      admin-mac=00:00:00:00:00:00 max-message-age=20s forward-delay=15s transmit-hold-count=6 ageing-time=5m

[admin@MikroTik] > int wire registration-table pr
 # INTERFACE                             RADIO-NAME       MAC-ADDRESS       AP  SIGNAL-STRENGTH TX-RATE UPTIME
 0 wlan1                                 000C422B99B9     00:0C:42:2B:99:B9 no  -59dBm@48Mbps   54Mbps  1h19m26s

What kind of information you needs to be able at helping me?

2

you have to provide the wireless link status for reference…

It most likely due to the interference..

3

Hello

Have you resolved the problem? I’m in the same situation here.

Artur