Hotspot + User Manager

glaurutis · January 18, 2007, 5:46pm

I have a server with mikrotik 2.9.39 with hotspot and to user manager. i put the initial configuration for the user manager as it says on the wiki :

/ radius add service=hotspot address=127.0.0.1 secret=123456

/ ip hotspot profile set hsprof1 use-radius=yes

/ tool user-manager customer add login=“MikroTik” password=“qwerty” permissions=owner

/ tool user-manager router add subscriber=MikroTik ip-address=127.0.0.1 shared-secret=123456

the problem is that when putting http://xxx.xxx.xxx.xxx/useradmin requests user and password, when entering them redirect to the page with error 501. User manager uses some particular port?
At the moment the mikrotik is behind another firewall and this only have port 80 8291 and 21 open. I need to open another?
I need to solve this problem hurry up.

Thanks in advance

sergejs · January 19, 2007, 11:19am

User-Manager uses the same port as RouterOS web-page, check that www service is enabled on ‘ip service’ menu.
Use 'http://xxx.xxx.xxx.xxx/userman,
make sure that used address on the User Manager is accessible from the network of your PC.

glaurutis · January 19, 2007, 6:43pm

Thanks, were putting the Link bad. Exists some form to change the logo of useradmin so that he appears the one of my company? Thanks

sergejs · January 22, 2007, 6:25am

Currently it is not possible.

bazigaar · February 2, 2007, 9:52am

helo,
i m sudhir and workng on mikrotik 2.9.39 i want to upgrade lincence software id.
actually i have mikrotik 2.9.39 and licence software-id is CAZD-JIT

can u provide me the solution.

wait for the reply

sudhir

sergejs · February 5, 2007, 5:42am

I guess you need higher license level for the current router. New license should be purchased for current software-id, if you need to use another license level.

channingzou · September 3, 2007, 3:43pm

after purchased for current software-id,what about old licence,can i use it to some where?

sergejs · September 4, 2007, 5:39am

You have two opportunities,

purchase new license for new router or HDD and use them in another location, use old one somewhere else.
Purchase license for the current router, old license is not used anywhere.

channingzou · September 5, 2007, 3:24am

it was RB ,HDD integrated ,do you have any idea?

sergejs · September 5, 2007, 1:25pm

I think I have replied in the previous post.

Either use this RB on antoher location and install RouterOS to x86 box and place instead.
or upgrade this license to highest level for the current RB.