hotspot

RouterOS Beginner Basics
1

hello to all guru

i have a question my hotspot is running works and fine, my mikbox have 5 ports the ether4 is the hotspot network

ether1 = wan port
ether2 = application servers 10.2.2.0/24
ether3 = office network 10.11.0.0/24
ether4 = hotspot 10.12.0.0/24
ether5 = 10.13.0.1/30(connected to 2nd router)

now my question is, if im connected now in hotspot i can ping office network such as one of our staff have static ip in his computer, but if im in office network i cant ping any static AP belong to hotspot network,i try to enable the proxy-arp in ether4 nothing happen, my nanostation belong to hotspot and the ip is 10.12.0.6 but i cant ping anyone can explain why is this happen?



thanks and regards to all

2

If the AP bypassed in the Hotspot so that it counts as an authenticated device? Traffic to and from authenticated devices is blocked. Alternatively you can permit ICMP traffic in the “/ip hotspot walled-garden ip” section. Or - my favorite option, if the hardware supports it - move the management IP of the AP onto a different network, since it doesn’t belong behind the Hotspot.

3

hi fewi still no luck i set the AP bypassed and allow the icmp in wall garden ip but the destination host is unreachable :frowning:

i using my office computer (10.11.0.15) pinging to 10.12.0.6 (nanostation act as AP)

thanks fewi for response hope you can solved my problem