how can I remote RB's from different locations

RouterOS General
1

Hey Guys
I just wanted to know how to do some basic routing say like from tower 1 using RB750 to my main office how would I access tower one from main office.

2

Sorry, but I don’t understand your question.
Add an IP address and ROS will start routing :slight_smile:

3

ok what I was trying to say is this:

I want to access my RB’s from main office that are on a tower (im trying get WISP going here) so I need to know if there is ports or anything that I would to access the RB’s from tower to main office.

4

so I need to know if there is ports or anything that I would to access the RB’s from tower to main office.

That sentence makes no sense :slight_smile:

OK, let’s view a standard configuration:

+-----+             +-----+        +----+            +-------+
| ISP |-------------| R1  |--------| R2 |--- .... ---| Cust. |
+-----+    |        +-----+        +----+            +-------+
           |
       +--------+
       | Office |
       +--------+

You would then create simple transfer networks between routers and give each router a global IP (do this by creating a bridge without ports and assigning a /32 IP).
Then configure static routes or OSPF and you can access your routers from anywhere in your network…

5

well how do I setup the “Then configure static routes or OSPF and you can access your routers from anywhere in your network”

6

timreichhart, there are lots and lots of different ways to configure your RBs, each with it’s ups and downs. Show us a diagram and then describe exactly want you want to achieve.