How close can two SXTs be placed?

[chemcat9]

I’m curious as to how close two SXTs can be placed without radio damage, and what the suggested power/protocol setting would be?

Thanks in advance!

[WirelessRudy]

@chemcat9

I’m curious as to how close two SXTs can be placed without radio damage, and what the suggested power/protocol setting would be?

Thanks in advance!

ehhh, put them close together and put the power high until one of the radios is gone. Then you know!

[WirelessRudy]

If signal strength on the receiving end is less then -30 I start to worry about my radios.
Signals between -45 and -70 are best where around -60 is ideal (with enough s/n ratio)

[chemcat9]

@WirelessRudy

ehhh, put them close together and put the power high until one of the radios is gone. Then you know!

I’ll let you demonstrate - with your radios naturally.

[FIPTech]

I tried 5 meters at minimum power without apparent damage during a couple days. NV2 protocol, 40 Mhz channel, about 160 Mbps real total bandwith.


If you rise power, then distorsion appear at receiving side and link reliability and bandwith drop dramaticaly.