How dynamic tunnels can be created?

RouterOS General
1

Hello.

I’m wondering how to create dynamic tunnels with some customers routers. For instance, I install a hap lite, or any wifi capable routerboard in customer home and would like that router to connect to our server. I currently do it with eoip tunnels but found it too much work creating a specific tunnel for each customer, is not bad if is only 5 or 10 but, when is more than that then it becomes a problem.

The basics: I need customers to connect via a L2 tunnel so I can add to a hotspot brige. Would like to just create a tunnel that would connect to the server no matter what the ip address of the customer is, in other words; the server doesn’t need to know the customer address and tunnel id as with EOIP. I’m running a routed network, I know it would be easier in a bridged network.

Please guide me in the right direction.

Thanks in advanced for your time.

2

Just use L2TP client with BCP on every clients router!

3

Thanks JohnTrivolta for replying.

I tried that but, I’m running a dhcp server and clients under the bridged interface can’t obtain an ip from server. Played around with mtu’s but can’t get it working.

4

If you have properly configured your BCP, you must successfully expand transparently /L2/ the hotspot network to the remote locations local bridges! Be sure the ppp profiles use the right bridges on both sides !