How to access a HEX router Webfig from another network?

RouterOS Beginner Basics
1

Hi,

I have got a new HEX router (RB750Gr3) that is automatically configured as 192.168.88.1/24. It is directly connected to my ISP router (192.168.0.1/24).

From any device connected to HEX I have access to the Webfig, however I have no access to it from my outer network.

Should I modify the firewall configuration? Could you please help on this?
Thanks in advance

2

Please simply configure it from the local network. Opening up configuration to outside will mean that all kinds of attackers will also try to “configure” it.

But yes, there is a firewall that is blocking connections from the ISP side. You can open it up to a specific IP addreess, if you know where you will be connecting from

3

Probably in this case it is safe to allow from 192.168.0.0/24

4

Thanks for both for your help!
How could I open the firewall for a specific address? I would like 192.168.0.4 to have an access for the 192.168.88.0 network.

5

Adding the “chain=input action=accept src-address=192.168.0.0/24 log=no log-prefix=”“” filter rule now I can access webfig via 192.168.0.239