how to conect 2 mikrotik....?? [urgent]

larmaid · February 19, 2007, 6:02am

hi im having a small problem, i just setting a new mikrotik (2.9.27) and i want to connect with my other mikrotik (2.9.7)
here r the ip config =

mikrotik 1(2.9.7) =
ether 1 → 10.10.0.xxx (local)
ether 2 → 202.165.xxx.xxx (global)

mkrotik 2(2.9.27) =
bridge1 → 10.10.0.xxx (i connected 4 ether with bridge1) (local)(reply-only)
ether5 → 202.165.xxx.xxx (global)

right now i connect to mikrotik 1 using ether1 the problem is i cant connect to local network on mikrotik 2…!!!

here is my nat on mikrotik2 =

chain=dstnat | action=dst-nat | to address=10.10.xxx.xxx | to-ports=0-65545

anyone can help me …

thx

janisk · February 19, 2007, 7:00am

this “bug” is solved in 2.9.40

larmaid · February 19, 2007, 7:16am

is this a “bug”…
so your saying that my configuration is right…!!!

janisk · February 19, 2007, 7:26am

ok. check your routes - if everything is ok, can you ping current nework (set on interface) can you ping one further.

and i encourage you to use newest version of RouterOS that would be 2.9.40 as it is recommended.

larmaid · February 19, 2007, 7:31am

my routers is OKAY, but the problem i cant connect to mikrotik2 local network…

janisk · February 19, 2007, 7:34am

are routed ok on MT2?

larmaid · February 19, 2007, 7:37am

the local network on MT2 is OK & the machine MT2 is OK, so whats wrong???any solution..???, btw janisk can i contact u by YM…???

janisk · February 19, 2007, 8:37am

please post ip address configuration
ip route configuration here of both routers.

and as i have understood than MT2 default gateway is MT1 right? or what you want to achieve with this configuration, that both routers have real ip address

larmaid · February 19, 2007, 9:03am

okay here r the all most configration :

mikrotik1 =
ether1 → 10.10.9.99/16 (local)
ether2 → 202.165.xxx.xxx (global)
gateway → 202.165.33.xxx (cisco gateway)

mikrotik2 =
ether1 → no ip (bridge1)
ether2 → no ip (bridge1)
ether3 → no ip (bridge1)
ether4 → no ip (bridge1)
bridge1 → 10.10.10.99/16 (bridge local)
ether 5 → 202.165.xxx.xxx (global)
gateway → 202.165.33.xxx (cisco gateway)

right now i connect to mikrotik 1 using ether1 the problem is i cant connect to local network on mikrotik 2…!!!

any solutions…???
time is closing…

janisk · February 19, 2007, 9:12am

so there is no physical link to MT2 other than through your cisco Gateway, is it?

larmaid · February 19, 2007, 9:22am

that is true…!!!
so…

normis · February 19, 2007, 11:04am

please upgrade, there is no reason not to