Hey @anav
I can’t thank you enough for your invaluable assistance.
To respect your time, I started fresh and implemented your recommended configurations.
I successfully set up both NordVPN and Mullvad. I’ve attached the configuration files for your reference.
I bypassed this step since you asked (why the heck did use 10.5.0.2??)
Assign an IP Address to the Interface
/ip address add address=10.5.0.2 interface=wg-nordvpn network=10.5.0.0
Results:
NordVPN: The connection is established, and my machine has internet access. However, websites (WWW) are not loading, though everything else appears to be functioning well.
Mullvad: The tunnel is connected with a successful handshake, but I’m unable to access the internet through this interface despite my efforts. I reached out to Mullvad’s support, but they were unable to assist further due to their unfamiliarity with MikroTik.
Here is the information for Mullvad just for the sake of someone more experinced confirm if this will work with Mikrotik or not.
It is a month subscribsion, so I`m not worried to share the private key.
PrivateKey = mOHy7pucd/cleTMlrI3DewIBww6B+GLowwJUpylaLVY=
Address = 10.74.219.199/32,fc00:bbbb:bbbb:bb01:
dbc6/128
DNS = 100.64.0.7
[Peer]
PublicKey = JEDqyG7iGjy/rYsE/9H7y0Sz8Sl+KWYYUvkPG7NnCjk=
AllowedIPs = 0.0.0.0/0,::0/0
Endpoint = 193.19.207.225:51820
I feel I’m nearly there lol
Please let me know if I shall open a new topic, so we don`t flood this one.
Thank you once more.
Mullvad.rsc (9.1 KB)
NordVPN_conf.rsc (8.7 KB)