Hi all, I need to configure a tool that enable keep my network working even some links are dropped. I have routed netowork with 6 main routers that are connected in a circle. There is /28 network between each two routers in order. 1-2 2-3 3-4 4-5 5-6 6-1
I suppose that OSPF is the tool.
I have read the mikrotik manual but when I configure OSFP network nothing happen, only one new route is in the routing table, it is red with flag “DI O”.
Can anyone help me?
I use winbox
add interface
add networks of each router
so if ip address of router is 192.168.0.1 add network 192.168.0.0/24
Only add networks your router can directly see
my configuration is:
[admin@mikrotik_apnam] routing ospf> print
router-id: xx.xx.208.22
distribute-default: never
redistribute-connected: as-type-1
redistribute-static: as-type-1
redistribute-rip: no
redistribute-bgp: no
metric-default: 1
metric-connected: 20
metric-static: 20
metric-rip: 20
metric-bgp: 20
[admin@mikrotik_apnam] routing ospf> network print
Flags: X - disabled, I - invalid
0 xx.xx.208.192/28 local_1
1 xx.xx.208.16/28 local_1
[admin@mikrotik_apnam] routing ospf> area print
Flags: X - disabled, I - invalid
0 backbone 0.0.0.0 none
1 local_1 0.0.0.1 no 1 none
[admin@mikrotik_apnam] routing ospf> neighbor print
router-id=xx.xx.208.22 address=xx.xx.208.22 priority=1 state="2-Way" state-changes=0 ls-retransmits=0 ls-requests=0 db-summaries=0 dr-id=xx.xx.208.22
backup-dr-id=0.0.0.0