rzpr01
1
hi all,
i’m a newbie…would you pls inform me how to configure mikrotik v2.7.14 to connect internet via 1X adsl router (aztech dsl305eu-connexant chipset).
interface (& routing) situation :
- lokal1 : 192.168.0.254/24
- lokal2 : 192.168.1.254/24
- publik : 10.0.0.217/24
- 0.0.0.0 gw : 10.0.0.217
ADSL-modem/router’s ip address :
- ip : 10.0.0.2/24
- DHCP : disabled
- NAT : enabled
- protocol : PPPoA VC-Mux, VPI : 1, VCI : 33
- Auto IP, auto DNS, auto Proxy : enabled
condition :
- dynamic ip (adsl modem/router)
- masquerade is set-up (MT2.7.14)
- ping to laptop (lokal1), to dns primary+secondary (in internet) : success
problem :
can’t browse the internet
thx,
reza
in4ni
2
You might want to consider upgrading to 2.9. I am not familiar with 2.7 configurations
Yes… he sould… another prehistoric user?
cmit
4
Hey - I just found a version 2.5 installation still running some weeks ago 
But yes, you (rzpr01) probably REALLY should upgrade…
Best regards,
Christian Meis
rzpr01
5
dear all,
thx … but why ? mT 2.7.14 can’t use w/ adsl modem/router ? btw, excuse for my english.
reza
rzpr01
6
dear all,
thx … but why ? mT 2.7.14 can’t used w/ adsl modem/router ? btw, excuse for my english.
reza