How does one disable 802.11b and slower rates like 1mbit on wifiwave2 (hAP ax^2 in this case)?
This is from a ax^2 with 2.4GHz ax band enabled under channel config. I can’t seem to find any settings related to disabling lower rates and older 802.11b protocol in wifiwave2 settings…
Thanks.
Kaj
Afaik you cant. I hope it will be added later.
AFAIK b is not supported on AX device. I tested with map, it would not connect. G neither.
But good question. It used to be possible in legacy wifi settings.
So I’ll wait as well for the answer 
802.11b is listed in the specs and it’s also showing in the Wireshark picture above I shared.
In the output of interface wifiwave2 radio detail I see on AX3, there is no mentioning of B.
G and N yes, but no B.