how to disable connection tracking in linux

Hardware MikroTik hardware general
1

Hi all,
i am new to linux
i want use L7 filter without using connection tracking,
can any body tell me how to disable connection tracking

i need solution urgently,

reply must

2

Hopefully you are new to Mikrotik, or you have the wrong forum. :slight_smile: Go to ip - firewall - connection - tracking. Take out the mark at connection tracking. That said, you wont be able to use firewall to filter any thing if connection tracking is disable.

3

You also won’t be able to use NAT.

4

you will be able to filer on per packet basis but you will not have nay connection information.

5

L7 filter requires connection tracking.

From:http://wiki.mikrotik.com/wiki/Manual:IP/Firewall/Connection_tracking
Features affected by connection tracking

  • NAT
    firewall:
  • connection-bytes
    connection-mark
    connection-type
    connection-state
    connection-limit
    connection-rate
    layer7-protocol
    p2p
    new-connection-mark
    tarpit
    p2p matching in simple queues