How to distribute /19 with new route package

RouterOS General
1

Hi,

How can I distribute a /19 network to my partners with the new routing package? In the old one I used Networks, but this is missing in the new one.

Thanks
Krisz

2

Magic,

The only way I have found to do this so far is to put another router at the head end, and set BGP to statically route the full /19 to the router that you are currently distributing the subnets from. You will need to get another block that you are not announcing from your current ISP.

This is, like I said, one way to do it. I am hoping that we can find a better answer shortly.

3

Assign the /19 to a null interface and then setup the filters to announce it. We have been doing this since 2.9.6 without problems.

Sam

4

That does seem to work just fine in standard BGP cases, just not in multihop cases. I know I am probably the only one running multihop and running into this issue. :slight_smile:

5

We run multihop in this fashion - although its on 2.9.7. TTL is 6, multihop is yes.

Sam