Hello,
Kindly pls let me know how to configure routerboard 450 mini router with winbox,
my isp internet ip is 172.25.0.90/20, gateway 172.25.0.25 and dns is 196.1.53.1, where should i configure this a wan incoming ip.
and where to configure my dhcp ip, so that when i connect my pc to eth1 or any should get dhcp ip from routerboard.
Pls let me know step by step.
Thanks
For what purpose are you going to use the router? If it is for home use and you want to set it up with 1 wan and 4 lan interfaces, then the procedure would be.
Name ether1 as the wan interface and set up the ISP connection on this interface.
Bridge interface ether2 …ether5 in one brigde.
set DHCP pool and setup DHCP server for the brigde
set up nat, routing and firewall - and port forwarding if needed.
It ain’t really that simple. For starters, I would say that this article on wiki is a good one and should get you started.
http://wiki.mikrotik.com/wiki/How_to_Connect_your_Home_Network_to_xDSL_Line
rgs Pilgrim
PS. Start winbox and then click on new terminal and then just paste the rules.