how to route ssid2 and ether5 clients through pptp out?

RouterOS Wireless Networking
1

hello
I have the Mt with default options . 192.168.88.1
is getting internet through a modem in ether1 with dmz.
I created a “pptp out” interface and is connected to the vpn server as I see in status (10.1.1.90 and gateway 10.1.1.1 ) .

After I created a second ssid .

1)How can i force the “ssid2” and the “ether5” clients to go through the “pptp out” ?

2)How I choose the clients to get ip directly from the vpn server
and now i create a nat so they get the ip range I decide?

2

For number 1: I assume, you have twoo SSID’s:

  1. test 1
  2. test 2

You want that clients which connect to test 2 will go through the VPN.

Easy:

Create a second Virtual AP. Fill in all the details, SSID, profile etc…
Add another bridge and put in that bridge the virtual AP, and ehternet 5, and the PPTP out. Done. Make sure that ethernet 5 has no master port.

3

thank you very much.
i have done that but the problem is i can not get local ip.
i have made a second pool for pptp and i made a second dhcp server but the problem is there.